- #Proficy machine edition software extension serial#
- #Proficy machine edition software extension download#
If for some reason it kicks itself out of Run Mode voluntarily you want to go into Proficy Machine Edition go to Target and one of the features there is Diagnostics, click on Diagnostics and your Info Viewer table will come up and tell you what the reason is that the processor kicked out of Run Mode. What you’re hoping for is that the processor is still in Run Mode when you return. So, if this is a processor that you feel is giving you problems what you should typically do is let the processor Run overnight or over a weekend, or for a couple days. (see image below) This completes the test. The last feature is of course the Memory Protect key on the top, it’s the Memory Protect Switch and when you turn it on, the LED turns on to indicate the memory is protected telling you that that feature Step 6: Checking the Memory Protect Switch This tells you that the LEDs work and the toggle switch works. In this illustration the setup begins in 1) Run with Outputs Enabled (all 3 LEDs light up solid) and by clicking the toggle switch down one level to 2) Outputs Disabled, (the top 2 LEDs light up solid) and clicking down one more level to 3) the Controller is Stopped (only the top LED lights up). The toggle switch is the Output Enabled, Run and Module Stop. To review, there are no other ports, just the one port and the toggle switch. Once you do get it into Run mode there are two other features to note. Your ultimate goal is to get this into Run Mode. Okay, so select that and Build in Progress. You don’t want to put anything to Permanent Flash Memory or anything like that. You want to build the Hardware Configuration and Logic, nothing else.
Okay so as you are doing that it will ask you what you want to build.
#Proficy machine edition software extension download#
So once that’s selected, go ahead and Clear that and you’re going to hit Download and Run which is the Download Information & Run button icon. In the Online Commands window you’re going to go to Clear and what you’re going to Clear here is the Controller & I/O Fault Table it’s just the bottom two selections.ĭon’t click on anything else you don’t want to clear or any information that you may need, that could be dangerous, so again just the Controller and I/O Fault Table.
What you are going to do is go ahead and connect up to the controller using the lightening bolt icon connector and using the hand print and you are going to go Online into program mode.Īlright, now that you’re there the next thing you are going to do is you’re going to go to Target, go to Online Commands.
#Proficy machine edition software extension serial#
Okay, so now that you do have it powered up, you want to connect up to it using an AS693232SNP serial cable (see image below) and open up Proficy Machine Edition. Step 3: Connect Up to Processor Using AS693232SNP If that’s the case, please see the bottom of this page for links to parts and service. So, first thing to do is power up and you should have an OK LED light and as usual, if you don’t have an OK light or your OK light is blinking and you don’t have communication, that means that there’s a problem with your processor and you won’t be able to follow this test. Note that in this illustration the door is off to the CPM790 just so that you can see more clearly. This setup is going to be required for the IC697CPM790 in order to get this processor into Run Mode which is your ultimate goal. The same rack and power supply is to the right and it has a BEM711 with extension cable. Illustrated here is an IC697CHS750 5 Slot Rack and a BEM711CPM790, being powered by an IC697PWR711. Note in this setup there is, to the right, a BEM713 (image 1 below) and there is an extended rack to the right, powered up. This troubleshooting guide is a test of a GE Fanuc IC697CPM790. How-to Troubleshoot IC697CPM790 GE Fanuc PLC Programming & Proficy Software 90-70 CPU Introduction: GE Fanuc IC697CPM790 Troubleshooting Guide
0 kommentar(er)
